Product finder
-
Filter by market and by application
-
Building & Construction
53
- All Building & Construction 53
- Adhesives, Caulks & Sealants 22
- Aluminum Cladding 5
- Carpet Backing 3
- Ceiling Paint 1
- Cured-In-Place-Pipe 2
- Elastomeric Roof Coatings 4
- Foam Insulation 3
- Gas Line Sheathing 2
- Paints & Coatings 16
- Partitions and Wall Boards 5
- Plaster / Stucco 1
- Roofing Membrane (High-End) 6
- Roofing 8
- Solvent-Based Elastomeric Roof Coatings 1
- TPO Roofing 6
- Tunnel Construction Cladding 6
- E & E, Infrastructure 4
- Industrial 9
- Thermoplastics 18
- Thermosets 35
- Transportation 5
- Wire & Cable 15
-
Building & Construction
53
Search narrowed by:
53 product grades found
Kemgard ® 1100
Kemgard® 1100 molybdate complex is a finer particle size zinc molybdate/magnesium silicate complex used in partitions and wall boards requiring plenum rating and improved mechanical properties.
Kemgard ® 911C
Kemgard® 911C molybdate complex is a zinc molybdate/magnesium silicate complex used in partitions and wall boards where smoke suppression is required.
Kemgard ® MZM
Kemgard® MZM molybdate complex is a zinc molybdate/magnesium hydroxide complex used in partitions and wall boards where smoke suppression is required.
Martinal ® OL-104 LEO
Martinal® OL-104 LEO aluminum hydroxide is a 4 m2/g untreated, fine precipitated aluminium hydroxide with improved compounding performance, higher thermal stability, better powder flowability and higher bulk density after conveying.
Martinal ® OL-107 LEO
Martinal® OL-107 LEO aluminum hydroxide is a 7 m2/g untreated, fine precipitated aluminium hydroxide with improved compounding performance, higher thermal stability, better powder flowability and higher bulk density after conveying and lower compound viscosity.
MoldX ® A400
MoldX® A400 aluminum hydroxide is a third generation optimized aluminum hydroxide product that gives low viscosity at a high loading level (250-380 phr), but requires 20-30% less loading than MoldX® A110 to achieve the same flame retardant performance.
Pergopak ® M3
Pergopak® M3 matting agent and carrier is used as a matting and effects agent for the coatings industry imparting high matting efficiency, low impact on rheology, improved scratch and abrasion resistance, improvement of adhesion and elasticity, excellent weather resistance and gloss retention. D90 17 microns.
Pergopak ® M4
Pergopak® M4 matting agent and carrier is used as a matting and effects agent for the coatings industry imparting high matting efficiency, low impact on rheology, improved scratch and abrasion resistance, improvement of adhesion and elasticity, excellent weather resistance and gloss retention. D90 14 microns.
Pergopak ® M5
Pergopak® M5 matting agent and carrier is used as a matting and effects agent for the coatings industry imparting high matting efficiency, low impact on rheology, improved scratch and abrasion resistance, improvement of adhesion and elasticity, excellent weather resistance and gloss retention. D90 11 microns.
Pergopak ® M6
Pergopak® M6 matting agent and carrier is used as a matting and effects agent for the coatings industry imparting high matting efficiency, low impact on rheology, improved scratch and abrasion resistance, improvement of adhesion and elasticity, excellent weather resistance and gloss retention. D90 6.5 microns.
HN 100
HN 100 aluminum hydroxide is a versatile, unground and high whiteness grade with an average median particle size of 75 microns, produced in Europe for applications requiring a course-particle size.
HN 336
HN 336 aluminum hydroxide is a versatile, ground and high whiteness grade with an average median particle size of 14 microns, produced in Europe for coatings-related applications.
HN 36
HN 36 aluminum hydroxide is a versatile, ground and high whiteness grade with an average median particle size of 20 microns, produced in Europe for coatings-related applications.
HN 434
HN 434 aluminum hydroxide is a versatile, ground and high whiteness grade with an average median particle size of 10 microns, produced in Europe for coatings-related applications.
HN 532
HN 532 aluminum hydroxide is a versatile, ground and high whiteness grade with an average median particle size of 6 microns, produced in Europe for coatings-related applications.
Hydral ® 710
Hydral® 710 aluminum hydroxide is a precipitated ultrafine aluminum hydroxide flame retardant with low surface area.
Hymod ® M9400 SG
Hymod® M9400 SG aluminum hydroxide is a hydrophobic aluminum hydroxide grade with enhanced surface treatment and lot-to-lot consistency.
Hymod ® SB136 SG
Hymod® SB136 SG aluminum hydroxide is a hydrophobic aluminum hydroxide grade with enhanced surface treatment and lot-to-lot consistency for coatings-related applications.
Hymod ® SB36 SG
Hymod® SB36 SG aluminum hydroxide is a hydrophobic grade with enhanced surface treatment for high loadings in sealants and composites.
Hymod ® SB432 SG
Hymod® SB432 SG aluminum hydroxide is a hydrophobic grade with enhanced surface treatment and lot-to-lot consistency for coatings-related applications.
Hymod ® SB432 ST1
Hymod® SB432 ST1 aluminum hydroxide is a medium particle size aluminum hydroxide treated with fatty acid.
Magnifin ® H-10 MV
MAGNIFIN® H-10 MV is high-purity magnesium hydroxide modified with a proprietary surface treatment. The patented process guarantees a regular structure of the cristallite.
Magnifin ® H-10
MAGNIFIN® H-10 magnesium hydroxide is a high-purity grade. It conforms to the standards of the European Pharmacopeia and is tailor-made for plastic applications with low smoke emission and high thermal stability up to 340°C.
Magnifin ® H-10 TV
MAGNIFIN® H-10 TV magnesium hydroxide is high-purity grade combining the positive effect of a vinyl silane coating with improved elongation properties in elastomer applications. The patented process guarantees a regular structure of the cristallite.
Magnifin ® H-5 GV
MAGNIFIN® H-5 GV magnesium hydroxide is a high-purity grade modified with a polymeric surface treatment. The patented process guarantees a regular structure of the cristallite. It is tailor-made for extrusion applications.
Magnifin ® H-5 HV
MAGNIFIN® H-5 HV magnesium hydroxide is a high-purity grade modified with a proprietory polymeric surface treatment. The patented process guarantees a regular crystal structure. It is tailor-made for injection moulding and wiring applications.
Magnifin ® H-5 MV
MAGNIFIN® H-5 MV magnesium hydroxide is high-purity grade modified with a proprietary surface treatment. The patented process guarantees a regular structure of the cristallite.
Magnifin ® H-5
MAGNIFIN® H-5 magnesium hydroxide is high-purity grade. It conforms to the European Pharmacopeia and is tailor-made for plastic and elastomer applications with low smoke emission and high thermal stability up to 340°C.
Magnifin ® H-5 TV
MAGNIFIN® H-5 TV magnesium hydroxide is high-purity grade combining the positive effect of a vinyl silane coating with improved elongation properties in elastomer applications. The patented process guarantees a regular structure of the cristallite.
Magnifin ® H-7
MAGNIFIN® H-7 magnesium hydroxide is high-purity grade. It conforms to the European Pharmacopeia and is tailor-made for plastic and elastomer applications.
Martinal ® ON-310S
Martinal® ON-310 S aluminum hydroxide is a 10 micron, ground aluminum hydroxide used as a flame retardant and smoke suppressant, produced in Bergheim, Germany.
Martinal ® ON-313S
Martinal® ON-313 S aluminum hydroxide is a 15 micron, ground aluminum hydroxide used as a flame retardant and smoke suppressant, produced in Bergheim, Germany.
Martinal ® ON-320
Martinal® ON-320 aluminum hydroxide is a 20 micron, ground aluminum hydroxide used as a flame retardant and smoke suppressant, produced in Bergheim, Germany.
Martinal ® ON-908
Martinal® ON-908 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.
Micral ® 1500
Micral® 1500 aluminum hydroxide is an ultrafine Alumina Trihydrate (ATH) with an average median particle size of 1.5 microns.
Micral ® 632
Micral® 632 aluminum hydroxide is a high brightness flame retardant grade with high surface area and has an average median particle size of 3.5 microns for coatings-related applications.
Micral ® 932
Micral® 932 aluminum hydroxide is a mechanically ultrafine Alumina Trihydrate (ATH) that has a high surface area and an average median particle size of 2 microns.
Micral ® AM550
Micral® AM550 aluminum hydroxide is a fine ground flame retardant and smoke suppressant with a median particle size of about 5.5 microns for adhesives, caulks and sealants applications.
MoldX ® A110
MoldX® A110 aluminum hydroxide is a second generation optimized aluminum hydroxide product that gives improved processing viscosities at very high loadings from 250 phr to greater than 350 phr.
MoldX ® S45
MoldX® S45 aluminum hydroxide is engineered to allow higher loadings versus standard aluminum hydroxide products and offers excellent processing from 180 phr to as high as 240 phr.
SB 136
SB-136 aluminum hydroxide is a ground high whiteness grade with an average median particle size of 18.5 microns.
SB 24
SB-24 is a off white unground course Aluminium Hydroxide with an average median particle size of 135 micons. It is ideal for use in applications requiring flame retardancy and smoke supperesion such as rubber, adhesives, and plastics.Additionally, it can be used in adsorbent/purfication applications.
SB 30
SB-30 aluminum hydroxide is a coarse grade which imparts fire retardance in textured coatings such as exterior insulation finish systems.
SB 336
SB-336 aluminum hydroxide is a ground high whiteness flame retardant with an average median particle size of 15.5 microns in adhesives, caulks and sealants applications.
SB 36
SB-36 aluminum hydroxide is a ground high whiteness flame retardant with an average median particle size of 25 microns in adhesives, caulks and sealants applications.
SB 432
SB-432 aluminum hydroxide is a ground high whiteness flame retardant with an average median particle size of 9 microns in adhesives, caulks and sealants applications.
SpaceRite ® S11
Spacerite® S-11 aluminum hydroxide is an ultra high brightness precipitated aluminum hydroxide grade with a median particle size of about 0.25 microns used to extend glossy coatings.
SpaceRite ® S3
Spacerite® S-3 aluminum hydroxide is an ultra high brightness precipitated aluminum hydroxide with a median particle size of about 1 micron in coatings applications.
Vertex ® 100ST1
Vertex® 100 ST1 magnesium hydroxide is a fine particle size fatty acid-treated grade.
Vertex ® 60HST
Vertex® 60 HST magnesium hydroxide is a fatty acid treated grade.