Product finder
Search narrowed by:
13 product grades found
MoldX ® A300
MoldX® A300 aluminum hydroxide is optimized to provide dramatically improved processing viscosities to sheet molding compounds (SMC) at loadings ranging from 250 phr to greater than 350 phr. It is Huber's highest performing 'low viscosity' grade.
MoldX ® A400
MoldX® A400 aluminum hydroxide is a third generation optimized aluminum hydroxide product that gives low viscosity at a high loading level (250-380 phr), but requires 20-30% less loading than MoldX® A110 to achieve the same flame retardant performance.
Hymod ® SB432 ST1
Hymod® SB432 ST1 aluminum hydroxide is a medium particle size aluminum hydroxide treated with fatty acid.
Martinal ® ON-313S
Martinal® ON-313 S aluminum hydroxide is a 15 micron, ground aluminum hydroxide used as a flame retardant and smoke suppressant, produced in Bergheim, Germany.
Martinal ® ON-904
Martinal® ON-904 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.
Martinal ® ON-906
Martinal® ON-906 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.
Martinal ® ON-908
Martinal® ON-908 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.
MoldX ® A110
MoldX® A110 aluminum hydroxide is a second generation optimized aluminum hydroxide product that gives improved processing viscosities at very high loadings from 250 phr to greater than 350 phr.
MoldX ® P12
MoldX® P12 aluminum hydroxide is optimized for pultrusion, resin infusion and vacuum bag molding applications. The product's narrow particle size distribution gives superb processing performance with fiberglass content greater than 60% by weight.
MoldX ® P18
MoldX® P18 aluminum hydroxide is for pultrusion, resin infusion, CIPP and vacuum bag molding applications. It's particle size distribution with top size particles of less than 18 microns gives superb processing performance at fiberglass contents greater than 50% by weight.
MoldX ® S45
MoldX® S45 aluminum hydroxide is engineered to allow higher loadings versus standard aluminum hydroxide products and offers excellent processing from 180 phr to as high as 240 phr.
SB 336
SB-336 aluminum hydroxide is a ground high whiteness flame retardant with an average median particle size of 15.5 microns in adhesives, caulks and sealants applications.
SB 36
SB-36 aluminum hydroxide is a ground high whiteness flame retardant with an average median particle size of 25 microns in adhesives, caulks and sealants applications.