Discover the right product for your need. Use our product finder
Search Solutions

Product finder

32 product grades found

Martinal ® OL-111 LE

Martinal® OL-111 LE aluminum hydroxide is an untreated, high surface area, fine precipitated aluminium hydroxides with a very low content of soluble electrolytes for demanding requirements (i.e. in the electrical and electronic industries), produced in Bergheim, Germany.

MoldX ® A300

MoldX® A300 aluminum hydroxide is optimized to provide dramatically improved processing viscosities to sheet molding compounds (SMC) at loadings ranging from 250 phr to greater than 350 phr. It is Huber's highest performing 'low viscosity' grade.

MoldX ® A400

MoldX® A400 aluminum hydroxide is a third generation optimized aluminum hydroxide product that gives low viscosity at a high loading level (250-380 phr), but requires 20-30% less loading than MoldX® A110 to achieve the same flame retardant performance.

Hydral ® 710

Hydral® 710 aluminum hydroxide is a precipitated ultrafine aluminum hydroxide flame retardant with low surface area.

Hydral ® PGA - SD

Hydral® PGA - SD aluminum hydroxide is a precipitated ultrafine aluminum hydroxide flame retardant with low surface area.

Hymod ® M932 SP

Hymod® M932 SP aluminum hydroxide is a high surface area vinyl silane treated aluminum hydroxide grade with a very precise, ultrafine particle size distribution.

Hymod ® M9400 SG

Hymod® M9400 SG aluminum hydroxide is a hydrophobic aluminum hydroxide grade with enhanced surface treatment and lot-to-lot consistency.

Hymod ® M9400 SP

Hymod® M9400 SP aluminum hydroxide is a vinyl silane treated, 1.1 micron particle size aluminum hydroxide flame retardant.

Hymod ® SB 336 SE

Hymod® SB336 SE aluminum hydroxide has proprietary surfactant treatments and an average particle size of 15.5 microns.

Hymod ® SB432 SP

Hymod® SB432 SP aluminum hydroxide is a vinyl silane treated, 9.1 micron particle size aluminum hydroxide.

Hymod ® SB432 ST1

Hymod® SB432 ST1 aluminum hydroxide is a medium particle size aluminum hydroxide treated with fatty acid.

Martinal ® ON-313S

Martinal® ON-313 S aluminum hydroxide is a 15 micron, ground aluminum hydroxide used as a flame retardant and smoke suppressant, produced in Bergheim, Germany.

Martinal ® ON-904

Martinal® ON-904 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.

Martinal ® ON-906

Martinal® ON-906 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.

Martinal ® ON-908

Martinal® ON-908 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.

Martinal ® ON-921

Martinal® ON-921 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.

Micral ® 1500

Micral® 1500 aluminum hydroxide is an ultrafine Alumina Trihydrate (ATH) with an average median particle size of 1.5 microns.

Micral ® 916

Micral® 916 aluminum hydroxide is a high brightness product with high surface area and has an average median particle size of 1.25 microns.

Micral ® AM550

Micral® AM550 aluminum hydroxide is a fine ground flame retardant and smoke suppressant with a median particle size of about 5.5 microns for adhesives, caulks and sealants applications.

MoldX ® A110

MoldX® A110 aluminum hydroxide is a second generation optimized aluminum hydroxide product that gives improved processing viscosities at very high loadings from 250 phr to greater than 350 phr.

MoldX ® P12

MoldX® P12 aluminum hydroxide is optimized for pultrusion, resin infusion and vacuum bag molding applications. The product's narrow particle size distribution gives superb processing performance with fiberglass content greater than 60% by weight.

MoldX ® P18

MoldX® P18 aluminum hydroxide is for pultrusion, resin infusion, CIPP and vacuum bag molding applications. It's particle size distribution with top size particles of less than 18 microns gives superb processing performance at fiberglass contents greater than 50% by weight.

MoldX ® S45

MoldX® S45 aluminum hydroxide is engineered to allow higher loadings versus standard aluminum hydroxide products and offers excellent processing from 180 phr to as high as 240 phr.

Onyx Elite ® 100

Onyx Elite® 100 aluminum hydroxide is a high purity, very translucent aluminum hydroxide with an average median particle size of 90 microns.

Onyx Elite ® 103

Onyx Elite® 103 aluminum hydroxide is a very translucent aluminum hydroxide offering excellent particle packing and fast gel/cure, with an average median particle size of 85 microns.

Onyx Elite ® 111

Onyx Elite® 111 aluminum hydroxide is a high purity, very translucent aluminum hydroxide with an average median particle size of 57 microns.

Onyx Elite ® 255

Onyx Elite® 255 aluminum hydroxide has excellent color and low resin demand, with air release optimized for solid surface. It is an aluminum hydroxide with an average median particle size of 30 microns.

Onyx Elite ® 339

Onyx Elite® 339 aluminum hydroxide has a soft white color and good air release designed for solid surface. It is an aluminum hydroxide with an average median particle size of 16 microns.

SB 336

SB-336 aluminum hydroxide is a ground high whiteness flame retardant with an average median particle size of 15.5 microns in adhesives, caulks and sealants applications.

SB 36

SB-36 aluminum hydroxide is a ground high whiteness flame retardant with an average median particle size of 25 microns in adhesives, caulks and sealants applications.

SpaceRite ® S11

Spacerite® S-11 aluminum hydroxide is an ultra high brightness precipitated aluminum hydroxide grade with a median particle size of about 0.25 microns used to extend glossy coatings.

SpaceRite ® S3

Spacerite® S-3 aluminum hydroxide is an ultra high brightness precipitated aluminum hydroxide with a median particle size of about 1 micron in coatings applications.