Product finder
-
Filter by market and by application
-
Building & Construction
16
- All Building & Construction 16
- Adhesives, Caulks & Sealants 5
- Aluminum Cladding 4
- Carpet Backing 1
- Ceiling Paint 1
- Cured-In-Place-Pipe 2
- Elastomeric Roof Coatings 2
- Foam Insulation 1
- Gas Line Sheathing 2
- Paints & Coatings 4
- Partitions and Wall Boards 2
- Roofing 4
- Solvent-Based Elastomeric Roof Coatings 1
- E & E, Infrastructure 8
- Industrial 30
- Thermoplastics 31
- Thermosets 44
- Transportation 28
- Wire & Cable 10
-
Building & Construction
16
Search narrowed by:
85 product grades found
Martinal ® OL-111 LE
Martinal® OL-111 LE aluminum hydroxide is an untreated, high surface area, fine precipitated aluminium hydroxides with a very low content of soluble electrolytes for demanding requirements (i.e. in the electrical and electronic industries), produced in Bergheim, Germany.
Martoxid ® TM-1250
Martoxid® TM-1250 calcined aluminum oxide is a thermally conductive super ground aluminum oxide utilized as a filler in thermoplastics, thermosets and resins. Used for thermal management and improvement of mechanical, electrical and rheological properties.
Martoxid ® TM-1320
Martoxid® TM-1320 calcined aluminum oxide is a thermally conductive super ground aluminum oxide utilized as a filler in thermoplastics, thermosets, resins etc. Used for thermal management, improvement of mechanical, electrical, and rheological properties.
Martoxid ® TM-1410
Martoxid® TM-1410 calcined aluminum oxide is a thermally conductive super ground aluminum oxide utilized as a filler in thermoplastics, thermosets and resins. Used for thermal management and improvement of mechanical, electrical and rheological properties.
Martoxid ® TM-2250
Martoxid® TM-2250 calcined aluminum oxide is a thermally conductive super ground aluminum oxide utlized as a filler in thermoplastics, thermosets and resins. Used for thermal management and improvement of mechanical, electrical and rheological properties.
Martoxid ® TM-2320
Martoxid® TM-2320 calcined aluminum oxide is a thermally conductive super ground aluminum oxide utilized as a filler in thermoplastics, thermosets, resins etc. Used for thermal management, improvement of mechanical, electrical, and rheological properties.
Martoxid ® TM-2410
Martoxid® TM-2410 calcined aluminum oxide is a thermally conductive super ground aluminum oxide utilized as a filler in thermoplastics, thermosets, resins etc. Used for thermal management, improvement of mechanical, electrical, and rheological properties.
Martoxid ® TM-3220
Martoxid® TM-3220 calcined aluminum oxide is a thermally conductive super ground aluminum oxide utilized as a filler in thermoplastics, thermosets, resins etc. Used for thermal management, improvement of mechanical, electrical, and rheological properties.
Martoxid ® TM-3310
Martoxid® TM-3310 calcined aluminum oxide is a thermally conductive super ground aluminum oxide utilized as a filler in thermoplastics, thermosets, resins etc. Used for thermal management, improvement of mechanical, electrical, and rheological properties.
Martoxid ® TM-3510
Martoxid® TM-3510 calcined aluminum oxide is a thermally conductive super ground aluminum oxide utilized as a filler in thermoplastics, thermosets, resins etc. Used for thermal management, improvement of mechanical, electrical, and rheological properties.
Martoxid ® TM-4220
Martoxid® TM-4220 calcined aluminum oxide is a thermally conductive super ground aluminum oxide utilized as a filler in engineering thermoplastics such as polyamide. Used for thermal management, improvement of mechanical, electrical, and rheological properties.
Martoxid ® TM-4250
Martoxid® TM-4250 calcined aluminum oxide is a thermally conductive super ground aluminum oxide utilized as a filler in engineering thermoplastics such as polyamide. Used for thermal management, improvement of mechanical, electrical, and rheological properties.
Martoxid ® TM-4410
Martoxid® TM-4410 calcined aluminum oxide is a thermally conductive super ground aluminum oxide utilized as a filler in engineering thermoplastics such as polyamide. Used for thermal management, improvement of mechanical, electrical, and rheological properties.
MoldX ® A300
MoldX® A300 aluminum hydroxide is optimized to provide dramatically improved processing viscosities to sheet molding compounds (SMC) at loadings ranging from 250 phr to greater than 350 phr. It is Huber's highest performing 'low viscosity' grade.
MoldX ® A400
MoldX® A400 aluminum hydroxide is a third generation optimized aluminum hydroxide product that gives low viscosity at a high loading level (250-380 phr), but requires 20-30% less loading than MoldX® A110 to achieve the same flame retardant performance.
Hydral ® 710
Hydral® 710 aluminum hydroxide is a precipitated ultrafine aluminum hydroxide flame retardant with low surface area.
Hydral ® PGA - SD
Hydral® PGA - SD aluminum hydroxide is a precipitated ultrafine aluminum hydroxide flame retardant with low surface area.
Hymod ® M932 SP
Hymod® M932 SP aluminum hydroxide is a high surface area vinyl silane treated aluminum hydroxide grade with a very precise, ultrafine particle size distribution.
Hymod ® M9400 SG
Hymod® M9400 SG aluminum hydroxide is a hydrophobic aluminum hydroxide grade with enhanced surface treatment and lot-to-lot consistency.
Hymod ® M9400 SP
Hymod® M9400 SP aluminum hydroxide is a vinyl silane treated, 1.1 micron particle size aluminum hydroxide flame retardant.
Hymod ® SB 336 SE
Hymod® SB336 SE aluminum hydroxide has proprietary surfactant treatments and an average particle size of 15.5 microns.
Hymod ® SB432 SP
Hymod® SB432 SP aluminum hydroxide is a vinyl silane treated, 9.1 micron particle size aluminum hydroxide.
Hymod ® SB432 ST1
Hymod® SB432 ST1 aluminum hydroxide is a medium particle size aluminum hydroxide treated with fatty acid.
Martinal ® ON-313S
Martinal® ON-313 S aluminum hydroxide is a 15 micron, ground aluminum hydroxide used as a flame retardant and smoke suppressant, produced in Bergheim, Germany.
Martinal ® ON-904
Martinal® ON-904 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.
Martinal ® ON-906
Martinal® ON-906 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.
Martinal ® ON-908
Martinal® ON-908 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.
Martinal ® ON-921
Martinal® ON-921 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.
Martoxid ® MZS
Martoxid® MZS calcined aluminum oxide is an unground, medium calcined aluminum oxide for the production of high brilliance polishing agents for a variety of ferrous and nonferrous metals, and for the fine grinding of plastics and lacquers.
Martoxid ® MZS-12
Martoxid® MZS-12 calcined aluminum oxide is a 10 micron medium calcined aluminum oxide for the production of high brilliance polishing agents for a variety of ferrous and nonferrous metals, and for the fine grinding of plastics and lacquers.
Martoxid ® MZS-3
Martoxid® MZS-3 calcined aluminum oxide is a 3 micron medium calcined aluminum oxide for the production of high brilliance polishing agents for a variety of ferrous and nonferrous metals, and for the fine grinding of plastics and lacquers.
Martoxid ® AN/I
Martoxid® AN/I calcined aluminum oxide is a coarse activated grade for the enrichment and purification of components in solutions. It is specifically used for adsorption, extraction and chromatography, produced in Bergheim, Germany.
Martoxid ® DN-206
Martoxid® DN-206 calcined aluminum oxide is a hard and wear resistant filler used for highly stressed brake systems specifically for the production of brake pads performing in trucks and heavy construction vehicles.
Martoxid ® DN-440
Martoxid® DN-440 calcined aluminum oxide is a 20 micron, hard calcined, fast-acting aluminium oxide used for fine polishing and repolishing of all kinds of steel and for processing nonferrous metals brilliance; pre-grinding of lacquers and plastics.
Martoxid ® DN-6
Martoxid® DN-6 calcined aluminum oxide is a hard and wear resistant filler used for highly stressed brake systems specifically for the production of brake pads performing in trucks and heavy construction vehicles.
Martoxid ® DN/Y
Martoxid® DN/Y calcined aluminum oxide is an aluminium oxide for the production of lapping abrasives for surface treatment of glass and crystal, ball bearings, valve seats, etc, produced in Bergheim, Germany.
Martoxid ® KMS-94
Martoxid® KMS-94 calcined aluminum oxide is a feedstock ready to press for uniaxial and isostatic pressing for the production of oxide ceramic bodies such as grinding media, insulating and wear-resistant parts, etc., produced in Bergheim, Germany.
Martoxid ® KMS-96
Martoxid® KMS-96 calcined aluminum oxide is a feedstock ready to press for uniaxial and isostatic pressing for the production of oxide ceramic bodies such as grinding media, insulating and wear-resistant parts, etc., produced in Bergheim, Germany.
Martoxid ® KMS-98
Martoxid® KMS-98 calcined aluminum oxide is a high purity feedstock ready to press for uniaxial and isostatic pressing for the production of oxide ceramic bodies such as grinding media, insulating and wear-resistant parts, etc., produced in Bergheim, Germany.
Martoxid ® KMS-99
Martoxid® KMS-99 calcined aluminum oxide is a high purity feedstock ready to press for uniaxial and isostatic pressing for the production of oxide ceramic bodies such as grinding media, insulating and wear-resistant parts, etc., produced in Bergheim, Germany.
Martoxid ® MDLS-6
Martoxid® MDLS-6 calcined aluminum oxide is a ground aluminium oxide with high Al2O3-content for chemical and mechanical resistant components. Filler in epoxy resin high voltage insulator parts (GIS) with excellent electrical and mechanical properties.
Martoxid ® MDS
Martoxid® MDS calcined aluminum oxide is an unground aluminum oxide with very high Al2O3-content, especially shaped products subjected to extremely high mechanical, thermal, chemical and electrical loads.
Martoxid ® MDS-6
Martoxid® MDS-6 calcined aluminum oxide is a ground aluminum oxide with high Al2O3-content, particularly suitable for production of wear-resistant components and products subjected to extremely high mechanical, thermal, chemical and electrical loads.
Martoxid ® MN/Y
Martoxid® MN/Y calcined aluminum oxide is designed for the production of lapping abrasives for surface treatment of glass and crystal, ball bearings, valve seats, etc., produced in Bergheim, Germany.
Martoxid ® MPS
Martoxid® MPS calcined aluminum oxide is a fine-grained, very soft aluminum oxide for the production of high brilliance polishing agents for a variety of ferrous and nonferrous metals, and for the fine grinding of plastics and lacquers.
Martoxid ® MR-23
Martoxid® MR-23 calcined aluminum oxide is an Al2O3-component in hard porcelains, refractory binding systems and wear-resistant ceramics, produced in Bergheim, Germany.
Martoxid ® MR-32
Martoxid® MR-32 calcined aluminum oxide is a high compressible superground alumina as a reactive binding component for shaped and unshaped refractory products as well as for technical ceramics, produced in Bergheim, Germany.
Martoxid ® MR-42
Martoxid® MR-42 calcined aluminum oxide is a high compressible superground alumina as a reactive binding component for shaped and unshaped refractory products as well as for cast and extrusion ceramics, produced in Bergheim, Germany.
Martoxid ® MR-52
Martoxid® MR-52 calcined aluminum oxide is a production of wear-resistant oxide ceramics with very high Al2O3-content for extreme service using isostatic and axial pressing, slip casting; injection molding, tape casting (substrate).
Martoxid ® MR-70
Martoxid® MR-70 calcined aluminum oxide is a high compressible superground alumina utilized as a reactive binding component for shaped and unshaped refractory products as well as for high performance ceramics, produced in Bergheim, Germany.