Product finder
-
Filter by market and by application
-
Building & Construction
17
- All Building & Construction 17
- Adhesives, Caulks & Sealants 6
- Aluminum Cladding 4
- Carpet Backing 1
- Ceiling Paint 1
- Cured-In-Place-Pipe 2
- Elastomeric Roof Coatings 2
- Foam Insulation 1
- Gas Line Sheathing 2
- Paints & Coatings 4
- Partitions and Wall Boards 2
- Roofing 4
- Solvent-Based Elastomeric Roof Coatings 1
- E & E, Infrastructure 1
- Industrial 4
- Thermoplastics 7
- Thermosets 14
- Transportation 1
- Wire & Cable 3
-
Building & Construction
17
Search narrowed by:
17 product grades found
MoldX ® A400
MoldX® A400 aluminum hydroxide is a third generation optimized aluminum hydroxide product that gives low viscosity at a high loading level (250-380 phr), but requires 20-30% less loading than MoldX® A110 to achieve the same flame retardant performance.
Hydral ® 710
Hydral® 710 aluminum hydroxide is a precipitated ultrafine aluminum hydroxide flame retardant with low surface area.
Hymod ® M9400 SG
Hymod® M9400 SG aluminum hydroxide is a hydrophobic aluminum hydroxide grade with enhanced surface treatment and lot-to-lot consistency.
Hymod ® SB432 ST1
Hymod® SB432 ST1 aluminum hydroxide is a medium particle size aluminum hydroxide treated with fatty acid.
Martinal ® ON-313S
Martinal® ON-313 S aluminum hydroxide is a 15 micron, ground aluminum hydroxide used as a flame retardant and smoke suppressant, produced in Bergheim, Germany.
Martinal ® ON-908
Martinal® ON-908 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.
Micral ® 1500
Micral® 1500 aluminum hydroxide is an ultrafine Alumina Trihydrate (ATH) with an average median particle size of 1.5 microns.
Micral ® AM550
Micral® AM550 aluminum hydroxide is a fine ground flame retardant and smoke suppressant with a median particle size of about 5.5 microns for adhesives, caulks and sealants applications.
MoldX ® A110
MoldX® A110 aluminum hydroxide is a second generation optimized aluminum hydroxide product that gives improved processing viscosities at very high loadings from 250 phr to greater than 350 phr.
MoldX ® S45
MoldX® S45 aluminum hydroxide is engineered to allow higher loadings versus standard aluminum hydroxide products and offers excellent processing from 180 phr to as high as 240 phr.
SB 336
SB-336 aluminum hydroxide is a ground high whiteness flame retardant with an average median particle size of 15.5 microns in adhesives, caulks and sealants applications.
SB 36
SB-36 aluminum hydroxide is a ground high whiteness flame retardant with an average median particle size of 25 microns in adhesives, caulks and sealants applications.
SpaceRite ® S11
Spacerite® S-11 aluminum hydroxide is an ultra high brightness precipitated aluminum hydroxide grade with a median particle size of about 0.25 microns used to extend glossy coatings.
SpaceRite ® S3
Spacerite® S-3 aluminum hydroxide is an ultra high brightness precipitated aluminum hydroxide with a median particle size of about 1 micron in coatings applications.
Vertex ® 100ST1
Vertex® 100 ST1 magnesium hydroxide is a fine particle size fatty acid-treated grade.
Vertex ® 60HST
Vertex® 60 HST magnesium hydroxide is a fatty acid treated grade.
Vertex ® 60
Vertex® 60 magnesium hydroxide is an untreated flame retardant for fire-rated thermoplastic compounds.