Discover the right product for your need. Use our product finder
Search Solutions

Product finder

60 product grades found

Martinal ® OL-104 LEO

Martinal® OL-104 LEO aluminum hydroxide is a 4 m2/g untreated, fine precipitated aluminium hydroxide with improved compounding performance, higher thermal stability, better powder flowability and higher bulk density after conveying.

Martinal ® OL-107 LEO

Martinal® OL-107 LEO aluminum hydroxide is a 7 m2/g untreated, fine precipitated aluminium hydroxide with improved compounding performance, higher thermal stability, better powder flowability and higher bulk density after conveying and lower compound viscosity.

Martinal ® OL-111 LE

Martinal® OL-111 LE aluminum hydroxide is an untreated, high surface area, fine precipitated aluminium hydroxides with a very low content of soluble electrolytes for demanding requirements (i.e. in the electrical and electronic industries), produced in Bergheim, Germany.

MoldX ® A300

MoldX® A300 aluminum hydroxide is optimized to provide dramatically improved processing viscosities to sheet molding compounds (SMC) at loadings ranging from 250 phr to greater than 350 phr. It is Huber's highest performing 'low viscosity' grade.

MoldX ® A400

MoldX® A400 aluminum hydroxide is a third generation optimized aluminum hydroxide product that gives low viscosity at a high loading level (250-380 phr), but requires 20-30% less loading than MoldX® A110 to achieve the same flame retardant performance.

HN 100

HN 100 aluminum hydroxide is a versatile, unground and high whiteness grade with an average median particle size of 75 microns, produced in Europe for applications requiring a course-particle size.

HN 336

HN 336 aluminum hydroxide is a versatile, ground and high whiteness grade with an average median particle size of 14 microns, produced in Europe for coatings-related applications.

HN 36

HN 36 aluminum hydroxide is a versatile, ground and high whiteness grade with an average median particle size of 20 microns, produced in Europe for coatings-related applications.

HN 434

HN 434 aluminum hydroxide is a versatile, ground and high whiteness grade with an average median particle size of 10 microns, produced in Europe for coatings-related applications.

HN 532

HN 532 aluminum hydroxide is a versatile, ground and high whiteness grade with an average median particle size of 6 microns, produced in Europe for coatings-related applications.

Hydral ® 710

Hydral® 710 aluminum hydroxide is a precipitated ultrafine aluminum hydroxide flame retardant with low surface area.

Hydral ® 5

Hydral® Coat 5 aluminum hydroxide is a high performing, untreated precipitated ultrafine white aluminum hydroxide powder with a median particle size of 0.5 microns and uniform particle size distribution. It is a spray-dried product.

Hydral ® 7

Hydral® Coat 7 aluminum hydroxide is a high performing, untreated precipitated ultrafine white aluminum hydroxide powder with a median particle size of 0.7 microns and uniform particle size distribution. Hydral Coat 7 is a fully de-agglomerated powder.

Hydral ® 8

Hydral® Coat 8 aluminum hydroxide is a high performing, untreated precipitated ultrafine white aluminum hydroxide powder with a median particle size of 0.8 microns and uniform particle size distribution. Hydral Coat 8 is a fully de-agglomerated powder.

Hydral ® PGA - SD

Hydral® PGA - SD aluminum hydroxide is a precipitated ultrafine aluminum hydroxide flame retardant with low surface area.

Hymod ® M632 SP

Hymod® M632 SP aluminum hydroxide has proprietary surfactant treatments and an average particle size of 3.5 microns.

Hymod ® M932 SP

Hymod® M932 SP aluminum hydroxide is a high surface area vinyl silane treated aluminum hydroxide grade with a very precise, ultrafine particle size distribution.

Hymod ® M9400 SG

Hymod® M9400 SG aluminum hydroxide is a hydrophobic aluminum hydroxide grade with enhanced surface treatment and lot-to-lot consistency.

Hymod ® M9400 SP

Hymod® M9400 SP aluminum hydroxide is a vinyl silane treated, 1.1 micron particle size aluminum hydroxide flame retardant.

Hymod ® SB 336 SE

Hymod® SB336 SE aluminum hydroxide has proprietary surfactant treatments and an average particle size of 15.5 microns.

Hymod ® SB136 SG

Hymod® SB136 SG aluminum hydroxide is a hydrophobic aluminum hydroxide grade with enhanced surface treatment and lot-to-lot consistency for coatings-related applications.

Hymod ® SB36 SG

Hymod® SB36 SG aluminum hydroxide is a hydrophobic grade with enhanced surface treatment for high loadings in sealants and composites.

Hymod ® SB432 SG

Hymod® SB432 SG aluminum hydroxide is a hydrophobic grade with enhanced surface treatment and lot-to-lot consistency for coatings-related applications.

Hymod ® SB432 SP

Hymod® SB432 SP aluminum hydroxide is a vinyl silane treated, 9.1 micron particle size aluminum hydroxide.

Hymod ® SB432 ST1

Hymod® SB432 ST1 aluminum hydroxide is a medium particle size aluminum hydroxide treated with fatty acid.

Martifin ® OL-005

Martifin® OL-005 aluminum hydroxide is pumpable aqueous suspension (slurry) of highly dispersed aluminium hydroxide for the paper and board industry, manufacturers of dispersion paints; flame retardant filler for aqueous binder systems, produced in Bergheim, Germany.

Martinal ® OL-104 C

Martinal® OL-104 C aluminum hydroxide is a surface treated, fine precipitated aluminum hydroxide, which allows faster mixing and improve the mechanical properties of cross-linked elastomers, produced in Bergheim, Germany.

Martinal ® OL-104 GO

Martinal® OL-104 GO aluminum hydroxide is fine precipitated with a proprietary coating. It is designed for improved elongation at break, rheological and electrical properties especially in thermoplastic or crosslinked EVA/PE or rubber compounds.

Martinal ® OL-104 IO

Martinal® OL-104 IO aluminum hydroxide is amino silane treated, finely precipitated aluminium hydroxide to improve mechanical, rheological and electrical properties e.g. in thermoplastic resins like EVA or EEA, produced in Bergheim, Germany.

Martinal ® OL-104 ZO

Martinal® OL-104 ZO aluminum hydroxide is vinyl-silane treated, fine precipitated aluminium hydroxide to improve mechanical, rheological and electrical properties in curable polyolefinic and rubber compounds, produced in Bergheim, Germany.

Martinal ® OL-107 C

Martinal® OL-107 C aluminum hydroxide is surface treated, fine precipitated alumina trihydrate which imparts special benefits when incorporated into resins and improve the mechanical properties of cross-linked elastomers, produced in Bergheim, Germany.

Martinal ® OL-107 IO

Martinal® OL-107 IO aluminum hydroxide is amino silane treated, finely precipitated aluminium hydroxide to improve mechanical, rheological and electrical properties e.g. in thermoplastic resins like EVA or EEA, produced in Bergheim, Germany.

Martinal ® OL-107 ZO

Martinal® OL-107 ZO aluminum hydroxide is vinyl-silane treated, fine precipitated aluminium hydroxide to improve mechanical, rheological and electrical properties in curable polyolefinic and rubber compounds, produced in Bergheim, Germany.

Martinal ® ON-310S

Martinal® ON-310 S aluminum hydroxide is a 10 micron, ground aluminum hydroxide used as a flame retardant and smoke suppressant, produced in Bergheim, Germany.

Martinal ® ON-313S

Martinal® ON-313 S aluminum hydroxide is a 15 micron, ground aluminum hydroxide used as a flame retardant and smoke suppressant, produced in Bergheim, Germany.

Martinal ® ON-320

Martinal® ON-320 aluminum hydroxide is a 20 micron, ground aluminum hydroxide used as a flame retardant and smoke suppressant, produced in Bergheim, Germany.

Martinal ® ON-904

Martinal® ON-904 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.

Martinal ® ON-906

Martinal® ON-906 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.

Martinal ® ON-908

Martinal® ON-908 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.

Martinal ® ON-921

Martinal® ON-921 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.

Martinal ® ON-935

Martinal® ON-935 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.

Micral ® 1500

Micral® 1500 aluminum hydroxide is an ultrafine Alumina Trihydrate (ATH) with an average median particle size of 1.5 microns.

Micral ® 532

Micral® 532 aluminum hydroxide is a high brightness flame retardant grade with high surface area and has an average median particle size of 5 microns.

Micral ® 632

Micral® 632 aluminum hydroxide is a high brightness flame retardant grade with high surface area and has an average median particle size of 3.5 microns for coatings-related applications.

Micral ® 916

Micral® 916 aluminum hydroxide is a high brightness product with high surface area and has an average median particle size of 1.25 microns.

Micral ® 932

Micral® 932 aluminum hydroxide is a mechanically ultrafine Alumina Trihydrate (ATH) that has a high surface area and an average median particle size of 2 microns.

Micral ® AM550

Micral® AM550 aluminum hydroxide is a fine ground flame retardant and smoke suppressant with a median particle size of about 5.5 microns for adhesives, caulks and sealants applications.

MoldX ® P12

MoldX® P12 aluminum hydroxide is optimized for pultrusion, resin infusion and vacuum bag molding applications. The product's narrow particle size distribution gives superb processing performance with fiberglass content greater than 60% by weight.

MoldX ® P18

MoldX® P18 aluminum hydroxide is for pultrusion, resin infusion, CIPP and vacuum bag molding applications. It's particle size distribution with top size particles of less than 18 microns gives superb processing performance at fiberglass contents greater than 50% by weight.

MoldX ® S45

MoldX® S45 aluminum hydroxide is engineered to allow higher loadings versus standard aluminum hydroxide products and offers excellent processing from 180 phr to as high as 240 phr.