Discover the right product for your need. Use our product finder
Search Solutions

Product finder

85 product grades found

Martinal ® ON-908

Martinal® ON-908 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.

Martinal ® ON-921

Martinal® ON-921 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.

Martinal ® ON-935

Martinal® ON-935 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.

Martoxid ® MDLS-6

Martoxid® MDLS-6 calcined aluminum oxide is a ground aluminium oxide with high Al2O3-content for chemical and mechanical resistant components. Filler in epoxy resin high voltage insulator parts (GIS) with excellent electrical and mechanical properties.

Micral ® 1500

Micral® 1500 aluminum hydroxide is an ultrafine Alumina Trihydrate (ATH) with an average median particle size of 1.5 microns.

Micral ® 532

Micral® 532 aluminum hydroxide is a high brightness flame retardant grade with high surface area and has an average median particle size of 5 microns.

Micral ® 632

Micral® 632 aluminum hydroxide is a high brightness flame retardant grade with high surface area and has an average median particle size of 3.5 microns for coatings-related applications.

Micral ® 916

Micral® 916 aluminum hydroxide is a high brightness product with high surface area and has an average median particle size of 1.25 microns.

Micral ® 932

Micral® 932 aluminum hydroxide is a mechanically ultrafine Alumina Trihydrate (ATH) that has a high surface area and an average median particle size of 2 microns.

Micral ® AM550

Micral® AM550 aluminum hydroxide is a fine ground flame retardant and smoke suppressant with a median particle size of about 5.5 microns for adhesives, caulks and sealants applications.

MoldX ® P12

MoldX® P12 aluminum hydroxide is optimized for pultrusion, resin infusion and vacuum bag molding applications. The product's narrow particle size distribution gives superb processing performance with fiberglass content greater than 60% by weight.

MoldX ® P18

MoldX® P18 aluminum hydroxide is for pultrusion, resin infusion, CIPP and vacuum bag molding applications. It's particle size distribution with top size particles of less than 18 microns gives superb processing performance at fiberglass contents greater than 50% by weight.

MoldX ® S45

MoldX® S45 aluminum hydroxide is engineered to allow higher loadings versus standard aluminum hydroxide products and offers excellent processing from 180 phr to as high as 240 phr.

Onyx Elite ® 100

Onyx Elite® 100 aluminum hydroxide is a high purity, very translucent aluminum hydroxide with an average median particle size of 90 microns.

Onyx Elite ® 103

Onyx Elite® 103 aluminum hydroxide is a very translucent aluminum hydroxide offering excellent particle packing and fast gel/cure, with an average median particle size of 85 microns.

Onyx Elite ® 111

Onyx Elite® 111 aluminum hydroxide is a high purity, very translucent aluminum hydroxide with an average median particle size of 57 microns.

Onyx Elite ® 255

Onyx Elite® 255 aluminum hydroxide has excellent color and low resin demand, with air release optimized for solid surface. It is an aluminum hydroxide with an average median particle size of 30 microns.

Onyx Elite ® 339

Onyx Elite® 339 aluminum hydroxide has a soft white color and good air release designed for solid surface. It is an aluminum hydroxide with an average median particle size of 16 microns.

Onyx Elite ® 431

Onyx Elite® 431 aluminum hydroxide is a high whiteness aluminum hydroxide with an average median particle size of 8 microns. It is used in blends for particle packing.

SB 136

SB-136 aluminum hydroxide is a ground high whiteness grade with an average median particle size of 18.5 microns.

SB 30

SB-30 aluminum hydroxide is a coarse grade which imparts fire retardance in textured coatings such as exterior insulation finish systems.

SB 332

SB-332 aluminum hydroxide is a ground high whiteness flame retardant with an average median particle size of 11 microns.

SB 336

SB-336 aluminum hydroxide is a ground high whiteness flame retardant with an average median particle size of 15.5 microns in adhesives, caulks and sealants applications.

SB 36

SB-36 aluminum hydroxide is a ground high whiteness flame retardant with an average median particle size of 25 microns in adhesives, caulks and sealants applications.

SB 432

SB-432 aluminum hydroxide is a ground high whiteness flame retardant with an average median particle size of 9 microns in adhesives, caulks and sealants applications.

SB 632

SB-632 aluminum hydroxide is a ground high whiteness flame retardant with an average median particle size of 3.5 microns.

SB 805

SB-805 aluminum hydroxide is ground aluminum hydroxide with an average median particle size of 2.5 microns.

Vertex ® 60HST

Vertex® 60 HST magnesium hydroxide is a fatty acid treated grade.

Vertex ® 60

Vertex® 60 magnesium hydroxide is an untreated flame retardant for fire-rated thermoplastic compounds.

Vertex ® 60 SV

Vertex® 60 SV magnesium hydroxide is a product with a proprietary surface treatment to allow for high loadings in polyolefin applications such as plastic pallets and rubbish containers.

Zerogen ® 100 SP

Zerogen® magnesium hydroxide products provide excellent fire retarding and smoke suppression performance for the thermoplastic and elastomeric compounds. The Zerogen® 100 products are characterized by higher chemical purity compared to Zerogen® 50 products and therefore provide further enhanced performance in compound applications where superior electrical properties are needed, e.g. cable primary insulation materials. Zerogen® 100 SP is an ultrafine particle size; low surface area magnesium hydroxide with vinylsilane treatment designed to provide excellent compounding rheology, high-quality powder dispersion and enhanced compound mechanical properties in such polymers as polyolefins, EPR/EPDM and other elastomers.

Zerogen ® 100 SVT

Zerogen® magnesium hydroxide products provide excellent fire retarding and smoke suppression performance for the thermoplastic and elastomeric compounds. The Zerogen® 100 SVT products are characterized by high chemical purity thus suitable for use in the compound applications where excellent electrical properties are needed, such as in cable insulation materials. Zerogen® 100 SVT is an ultrafine particle size magnesium hydroxide with a proprietary surface treatment that provides superior fire performance when used to make fire-rated EVA compounds. The proprietary surface treatment improves smoke suppression efficiency of magnesium hydroxide and increases limiting oxygen index (LOI) of the EVA compound. As a result, lower magnesium hydroxide loading level can be used leading to enhanced rheological and processing performance, and improved compound mechanical properties. The surface treatment also promotes compatibility of the magnesium hydroxide with the polymer and high quality of dispersion.

Zerogen ® 50

Zerogen® 50 is an untreated magnesium hydroxide which can be used in polyolefins, EPR/EPDM, PVC and certain engineering thermoplastics such as polyamides to make zero-halogen or low-smoke compounds.

Zerogen ® 50 SP

Zerogen® 50 SP is a vinyl silane-treated product designed to provide excellent compounding rheology and high-quality dispersion into such polymers as polyolefins, EPR/EPDM and other elastomers. The vinyl silane treatment also improves mechanical properties.

Zerogen ® 50 SV

Zerogen® 50 SV is a magnesium hydroxide with a proprietary surface treatment that provides superior fire performance when used to make fire-rated EVA compounds. The proprietary surface treatment improves smoke suppression efficiency of magnesium hydroxide and increases limiting oxygen index (LOI) of the EVA compound. As a result, lower magnesium hydroxide loading level can be used leading to enhanced rheological and processing performance, and improved compound mechanical properties. The surface treatment also promotes compatibility of the magnesium hydroxide with the polymer and high quality of dispersion.