Discover the right product for your need. Use our product finder
Search Solutions

Product finder

40 product grades found

Pergopak ® M3

Pergopak® M3 matting agent and carrier is used as a matting and effects agent for the coatings industry imparting high matting efficiency, low impact on rheology, improved scratch and abrasion resistance, improvement of adhesion and elasticity, excellent weather resistance and gloss retention. D90 17 microns.

Pergopak ® M4

Pergopak® M4 matting agent and carrier is used as a matting and effects agent for the coatings industry imparting high matting efficiency, low impact on rheology, improved scratch and abrasion resistance, improvement of adhesion and elasticity, excellent weather resistance and gloss retention. D90 14 microns.

Pergopak ® M5

Pergopak® M5 matting agent and carrier is used as a matting and effects agent for the coatings industry imparting high matting efficiency, low impact on rheology, improved scratch and abrasion resistance, improvement of adhesion and elasticity, excellent weather resistance and gloss retention. D90 11 microns.

Pergopak ® M6

Pergopak® M6 matting agent and carrier is used as a matting and effects agent for the coatings industry imparting high matting efficiency, low impact on rheology, improved scratch and abrasion resistance, improvement of adhesion and elasticity, excellent weather resistance and gloss retention. D90 6.5 microns.

Hydral ® 710

Hydral® 710 aluminum hydroxide is a precipitated ultrafine aluminum hydroxide flame retardant with low surface area.

Hydral ® 7

Hydral® Coat 7 aluminum hydroxide is a high performing, untreated precipitated ultrafine white aluminum hydroxide powder with a median particle size of 0.7 microns and uniform particle size distribution. Hydral Coat 7 is a fully de-agglomerated powder.

Hymod ® SB 336 SE

Hymod® SB336 SE aluminum hydroxide has proprietary surfactant treatments and an average particle size of 15.5 microns.

Hymod ® SB432 SP

Hymod® SB432 SP aluminum hydroxide is a vinyl silane treated, 9.1 micron particle size aluminum hydroxide.

Hymod ® SB432 ST1

Hymod® SB432 ST1 aluminum hydroxide is a medium particle size aluminum hydroxide treated with fatty acid.

Martinal ® OL-104 ZO

Martinal® OL-104 ZO aluminum hydroxide is vinyl-silane treated, fine precipitated aluminium hydroxide to improve mechanical, rheological and electrical properties in curable polyolefinic and rubber compounds, produced in Bergheim, Germany.

Martinal ® OL-107 ZO

Martinal® OL-107 ZO aluminum hydroxide is vinyl-silane treated, fine precipitated aluminium hydroxide to improve mechanical, rheological and electrical properties in curable polyolefinic and rubber compounds, produced in Bergheim, Germany.

Martoxid ® MZS

Martoxid® MZS calcined aluminum oxide is an unground, medium calcined aluminum oxide for the production of high brilliance polishing agents for a variety of ferrous and nonferrous metals, and for the fine grinding of plastics and lacquers.

Martoxid ® MZS-12

Martoxid® MZS-12 calcined aluminum oxide is a 10 micron medium calcined aluminum oxide for the production of high brilliance polishing agents for a variety of ferrous and nonferrous metals, and for the fine grinding of plastics and lacquers.

Martoxid ® MZS-3

Martoxid® MZS-3 calcined aluminum oxide is a 3 micron medium calcined aluminum oxide for the production of high brilliance polishing agents for a variety of ferrous and nonferrous metals, and for the fine grinding of plastics and lacquers.

Martoxid ® AN/I

Martoxid® AN/I calcined aluminum oxide is a coarse activated grade for the enrichment and purification of components in solutions. It is specifically used for adsorption, extraction and chromatography, produced in Bergheim, Germany.

Martoxid ® DN-206

Martoxid® DN-206 calcined aluminum oxide is a hard and wear resistant filler used for highly stressed brake systems specifically for the production of brake pads performing in trucks and heavy construction vehicles.

Martoxid ® DN-440

Martoxid® DN-440 calcined aluminum oxide is a 20 micron, hard calcined, fast-acting aluminium oxide used for fine polishing and repolishing of all kinds of steel and for processing nonferrous metals brilliance; pre-grinding of lacquers and plastics.

Martoxid ® DN/Y

Martoxid® DN/Y calcined aluminum oxide is an aluminium oxide for the production of lapping abrasives for surface treatment of glass and crystal, ball bearings, valve seats, etc, produced in Bergheim, Germany.

Martoxid ® KMS-94

Martoxid® KMS-94 calcined aluminum oxide is a feedstock ready to press for uniaxial and isostatic pressing for the production of oxide ceramic bodies such as grinding media, insulating and wear-resistant parts, etc., produced in Bergheim, Germany.

Martoxid ® KMS-96

Martoxid® KMS-96 calcined aluminum oxide is a feedstock ready to press for uniaxial and isostatic pressing for the production of oxide ceramic bodies such as grinding media, insulating and wear-resistant parts, etc., produced in Bergheim, Germany.

Martoxid ® KMS-98

Martoxid® KMS-98 calcined aluminum oxide is a high purity feedstock ready to press for uniaxial and isostatic pressing for the production of oxide ceramic bodies such as grinding media, insulating and wear-resistant parts, etc., produced in Bergheim, Germany.

Martoxid ® KMS-99

Martoxid® KMS-99 calcined aluminum oxide is a high purity feedstock ready to press for uniaxial and isostatic pressing for the production of oxide ceramic bodies such as grinding media, insulating and wear-resistant parts, etc., produced in Bergheim, Germany.

Martoxid ® MDS

Martoxid® MDS calcined aluminum oxide is an unground aluminum oxide with very high Al2O3-content, especially shaped products subjected to extremely high mechanical, thermal, chemical and electrical loads.

Martoxid ® MDS-6

Martoxid® MDS-6 calcined aluminum oxide is a ground aluminum oxide with high Al2O3-content, particularly suitable for production of wear-resistant components and products subjected to extremely high mechanical, thermal, chemical and electrical loads.

Martoxid ® MN/Y

Martoxid® MN/Y calcined aluminum oxide is designed for the production of lapping abrasives for surface treatment of glass and crystal, ball bearings, valve seats, etc., produced in Bergheim, Germany.

Martoxid ® MPS

Martoxid® MPS calcined aluminum oxide is a fine-grained, very soft aluminum oxide for the production of high brilliance polishing agents for a variety of ferrous and nonferrous metals, and for the fine grinding of plastics and lacquers.

Martoxid ® MR-23

Martoxid® MR-23 calcined aluminum oxide is an Al2O3-component in hard porcelains, refractory binding systems and wear-resistant ceramics, produced in Bergheim, Germany.

Martoxid ® MR-32

Martoxid® MR-32 calcined aluminum oxide is a high compressible superground alumina as a reactive binding component for shaped and unshaped refractory products as well as for technical ceramics, produced in Bergheim, Germany.

Martoxid ® MRS-1

Martoxid® MRS-1 calcined aluminum oxide is a superground aluminum oxide for ceramics with a high Al2O3-content, subjected to extremely high mechanical, thermal, chemical and electrical loads for applications like high efficiency spark plugs and substrates. D50 of 1 micron and D100 of <10 microns.

Martoxid ® MZS-1

Martoxid® MZS-1 calcined aluminum oxide is a ground Al2O3-component in hard porcelains, refractory binding systems and wear-resistant ceramics, produced in Bergheim, Germany.

Martoxid ® PC-12/1

Martoxid® PC-12/1 calcined aluminum oxide is a premium aluminum oxide for the production of polishing pastes and emulsions, especially for fine polishing and repolishing of stainless steel, nonferrous metals, lacquers, plastics and glass.

Martoxid ® PC-12/3

Martoxid® PC-12/3 calcined aluminum oxide is a premium aluminum oxide for the production of polishing pastes and emulsions, especially for fine polishing and repolishing of stainless steel, nonferrous metals, lacquers, plastics and glass. It has a d90 of 13 microns, the narrowest particle size distribution of this series.

Martoxid ® PN-202

Martoxid® PN-202 calcined aluminum oxideis a soft aluminium oxide used in the production of high-brilliance polishing agents for mainly stainless steel and steel and for polishing agents for nonferrous metals and fine grinding of plastics and lacquers.

Martoxid ® PN-6 (12)

Martoxid® PN-6 (12) calcined aluminum oxide is a soft aluminium oxide used in the production of high-brilliance polishing agents for mainly stainless steel and steel and for polishing agents for nonferrous metals and fine grinding of plastics and lacquers.

Martoxid ® PN-6

Martoxid® PN-6 calcined aluminum oxide is a soft aluminium oxide used in the production of high-brilliance polishing agents for mainly stainless steel and steel and for polishing agents for nonferrous metals and fine grinding of plastics and lacquers.

Martoxid ® PS-6 (12)

Martoxid® PS-6 (12) calcined aluminum oxide is a super-soft aluminium oxide used in the production of high-brilliance polishing agents for mainly stainless steel and steel and for polishing agents for nonferrous metals and fine grinding of plastics and lacquers.

Martoxid ® PS-6

Martoxid® PS-6 calcined aluminum oxide is a soft aluminium oxide used in the production of high-brilliance polishing agents for mainly stainless steel and steel and for polishing agents for nonferrous metals and fine grinding of plastics and lacquers.

Onyx Elite ® 339

Onyx Elite® 339 aluminum hydroxide has a soft white color and good air release designed for solid surface. It is an aluminum hydroxide with an average median particle size of 16 microns.

SB 336

SB-336 aluminum hydroxide is a ground high whiteness flame retardant with an average median particle size of 15.5 microns in adhesives, caulks and sealants applications.

Zerogen ® 100 SP

Zerogen® 100 SP magnesium hydroxide is an ultrafine particle size, vinyl-silane treated grade with low electrolyte content providing fire retardance and smoke suppression with outstanding physical properties in polyolefin wire and cable applications.