Product finder
-
Filter by market and by application
-
Building & Construction
35
- All Building & Construction 35
- Adhesives, Caulks & Sealants 19
- Aluminum Cladding 5
- Carpet Backing 3
- Ceiling Paint 1
- Cured-In-Place-Pipe 2
- Elastomeric Roof Coatings 4
- Foam Insulation 2
- Gas Line Sheathing 1
- Paints & Coatings 10
- Partitions and Wall Boards 1
- Roofing Membrane (High-End) 2
- Roofing 8
- Solvent-Based Elastomeric Roof Coatings 1
- TPO Roofing 2
- Tunnel Construction Cladding 2
- E & E, Infrastructure 6
- Industrial 5
- Thermoplastics 43
- Thermosets 86
- Transportation 16
- Wire & Cable 24
-
Building & Construction
35
Search narrowed by:
86 product grades found
Martinal ® OL-104 LEO
Martinal® OL-104 LEO aluminum hydroxide is a 4 m2/g untreated, fine precipitated aluminium hydroxide with improved compounding performance, higher thermal stability, better powder flowability and higher bulk density after conveying.
Martinal ® OL-111 LE
Martinal® OL-111 LE aluminum hydroxide is an untreated, high surface area, fine precipitated aluminium hydroxides with a very low content of soluble electrolytes for demanding requirements (i.e. in the electrical and electronic industries), produced in Bergheim, Germany.
Martinal ® TM-2550
Martinal® TM-2550 aluminum hydroxide is a thermally conductive material designed to be used either by itself or in blends with other fillers to obtain high loadings in epoxy, polyurethane and silicone-based gap-fillers.
Martinal ® TM-2590
Martinal® TM-2590 aluminum hydroxide is a thermally conductive material designed to be used either by itself or in blends with other fillers to obtain high loadings in epoxy, polyurethane and silicone-based gap-fillers.
Martinal ® TM-3620
Martinal® TM-3620 aluminum hydroxide is a thermally conductive material designed to be used either by itself or in blends with other fillers to obtain high loadings in epoxy, polyurethane and silicone-based gap-fillers.
Martinal ® TM-3810
Martinal® TM-3810 aluminum hydroxide is a thermally conductive material designed to be used either by itself or in blends with other fillers to obtain high loadings in epoxy, polyurethane and silicone-based gap-fillers.
Martoxid ® TM-1250
Martoxid® TM-1250 calcined aluminum oxide is a thermally conductive super ground aluminum oxide utilized as a filler in thermoplastics, thermosets and resins. Used for thermal management and improvement of mechanical, electrical and rheological properties.
Martoxid ® TM-1320
Martoxid® TM-1320 calcined aluminum oxide is a thermally conductive super ground aluminum oxide utilized as a filler in thermoplastics, thermosets, resins etc. Used for thermal management, improvement of mechanical, electrical, and rheological properties.
Martoxid ® TM-1410
Martoxid® TM-1410 calcined aluminum oxide is a thermally conductive super ground aluminum oxide utilized as a filler in thermoplastics, thermosets and resins. Used for thermal management and improvement of mechanical, electrical and rheological properties.
Martoxid ® TM-2090
Martoxid® TM-2090 calcined aluminum oxide is a thermally conductive sub-micron, superground aluminum oxide utlized as a filler in thermoplastics, thermosets and resins. Used for thermal management and improvement of mechanical, electrical and rheological properties.
Martoxid ® TM-2250
Martoxid® TM-2250 calcined aluminum oxide is a thermally conductive super ground aluminum oxide utlized as a filler in thermoplastics, thermosets and resins. Used for thermal management and improvement of mechanical, electrical and rheological properties.
Martoxid ® TM-2320
Martoxid® TM-2320 calcined aluminum oxide is a thermally conductive super ground aluminum oxide utilized as a filler in thermoplastics, thermosets, resins etc. Used for thermal management, improvement of mechanical, electrical, and rheological properties.
Martoxid ® TM-2410
Martoxid® TM-2410 calcined aluminum oxide is a thermally conductive super ground aluminum oxide utilized as a filler in thermoplastics, thermosets, resins etc. Used for thermal management, improvement of mechanical, electrical, and rheological properties.
Martoxid ® TM-3220
Martoxid® TM-3220 calcined aluminum oxide is a thermally conductive super ground aluminum oxide utilized as a filler in thermoplastics, thermosets, resins etc. Used for thermal management, improvement of mechanical, electrical, and rheological properties.
Martoxid ® TM-3310
Martoxid® TM-3310 calcined aluminum oxide is a thermally conductive super ground aluminum oxide utilized as a filler in thermoplastics, thermosets, resins etc. Used for thermal management, improvement of mechanical, electrical, and rheological properties.
Martoxid ® TM-3510
Martoxid® TM-3510 calcined aluminum oxide is a thermally conductive super ground aluminum oxide utilized as a filler in thermoplastics, thermosets, resins etc. Used for thermal management, improvement of mechanical, electrical, and rheological properties.
MoldX ® A300
MoldX® A300 aluminum hydroxide is optimized to provide dramatically improved processing viscosities to sheet molding compounds (SMC) at loadings ranging from 250 phr to greater than 350 phr. It is Huber's highest performing 'low viscosity' grade.
MoldX ® A400
MoldX® A400 aluminum hydroxide is a third generation optimized aluminum hydroxide product that gives low viscosity at a high loading level (250-380 phr), but requires 20-30% less loading than MoldX® A110 to achieve the same flame retardant performance.
HN 336
HN 336 aluminum hydroxide is a versatile, ground and high whiteness grade with an average median particle size of 14 microns, produced in Europe for coatings-related applications.
HN 434
HN 434 aluminum hydroxide is a versatile, ground and high whiteness grade with an average median particle size of 10 microns, produced in Europe for coatings-related applications.
HN 532
HN 532 aluminum hydroxide is a versatile, ground and high whiteness grade with an average median particle size of 6 microns, produced in Europe for coatings-related applications.
Hydral ® 710
Hydral® 710 aluminum hydroxide is a precipitated ultrafine aluminum hydroxide flame retardant with low surface area.
Hydral ® 5
Hydral® Coat 5 aluminum hydroxide is a high performing, untreated precipitated ultrafine white aluminum hydroxide powder with a median particle size of 0.5 microns and uniform particle size distribution. It is a spray-dried product.
Hydral ® 7
Hydral® Coat 7 aluminum hydroxide is a high performing, untreated precipitated ultrafine white aluminum hydroxide powder with a median particle size of 0.7 microns and uniform particle size distribution. Hydral Coat 7 is a fully de-agglomerated powder.
Hydral ® 8
Hydral® Coat 8 aluminum hydroxide is a high performing, untreated precipitated ultrafine white aluminum hydroxide powder with a median particle size of 0.8 microns and uniform particle size distribution. Hydral Coat 8 is a fully de-agglomerated powder.
Hydral ® PGA - SD
Hydral® PGA - SD aluminum hydroxide is a precipitated ultrafine aluminum hydroxide flame retardant with low surface area.
Hymod ® M632 SP
Hymod® M632 SP aluminum hydroxide has proprietary surfactant treatments and an average particle size of 3.5 microns.
Hymod ® M932 SP
Hymod® M932 SP aluminum hydroxide is a high surface area vinyl silane treated aluminum hydroxide grade with a very precise, ultrafine particle size distribution.
Hymod ® M9400 SG
Hymod® M9400 SG aluminum hydroxide is a hydrophobic aluminum hydroxide grade with enhanced surface treatment and lot-to-lot consistency.
Hymod ® M9400 SP
Hymod® M9400 SP aluminum hydroxide is a vinyl silane treated, 1.1 micron particle size aluminum hydroxide flame retardant.
Hymod ® SB 336 SE
Hymod® SB336 SE aluminum hydroxide has proprietary surfactant treatments and an average particle size of 15.5 microns.
Hymod ® SB136 SG
Hymod® SB136 SG aluminum hydroxide is a hydrophobic aluminum hydroxide grade with enhanced surface treatment and lot-to-lot consistency for coatings-related applications.
Hymod ® SB432 SG
Hymod® SB432 SG aluminum hydroxide is a hydrophobic grade with enhanced surface treatment and lot-to-lot consistency for coatings-related applications.
Hymod ® SB432 SP
Hymod® SB432 SP aluminum hydroxide is a vinyl silane treated, 9.1 micron particle size aluminum hydroxide.
Hymod ® SB432 ST1
Hymod® SB432 ST1 aluminum hydroxide is a medium particle size aluminum hydroxide treated with fatty acid.
Magnifin ® H-10 A
MAGNIFIN® H-10 A magnesium hydroxide is a high-purity grade treated with a special vinyl silane coating. The patented process guarantees a regular structure of the cristallite. It is tailor-made for plastic and elastomer applications.
Magnifin ® H-10
MAGNIFIN® H-10 magnesium hydroxide is a high-purity grade. It conforms to the standards of the European Pharmacopeia and is tailor-made for plastic applications with low smoke emission and high thermal stability up to 340°C.
Magnifin ® H-10 TV
MAGNIFIN® H-10 TV magnesium hydroxide is high-purity grade combining the positive effect of a vinyl silane coating with improved elongation properties in elastomer applications. The patented process guarantees a regular structure of the cristallite.
Magnifin ® H-5 A
MAGNIFIN® H-5 A magnesium hydroxide is a high-purity grade surface treated with a special vinyl silane coating. The patented process guarantees a regular structure of the cristallite and is tailor-made for plastic and elastomer applications.
Magnifin ® H-5 IV
MAGNIFIN® H-5 IV magnesium hydroxide is a high-purity grade with a high bulk density, surface treated with a special amino polysiloxane. The patented process guarantees a regular structure of the cristallite.
Magnifin ® H-5
MAGNIFIN® H-5 magnesium hydroxide is high-purity grade. It conforms to the European Pharmacopeia and is tailor-made for plastic and elastomer applications with low smoke emission and high thermal stability up to 340°C.
Magnifin ® H-5 TV
MAGNIFIN® H-5 TV magnesium hydroxide is high-purity grade combining the positive effect of a vinyl silane coating with improved elongation properties in elastomer applications. The patented process guarantees a regular structure of the cristallite.
Magnifin ® H-7
MAGNIFIN® H-7 magnesium hydroxide is high-purity grade. It conforms to the European Pharmacopeia and is tailor-made for plastic and elastomer applications.
Martinal ® OL-104 ZO
Martinal® OL-104 ZO aluminum hydroxide is vinyl-silane treated, fine precipitated aluminium hydroxide to improve mechanical, rheological and electrical properties in curable polyolefinic and rubber compounds, produced in Bergheim, Germany.
Martinal ® OL-107 ZO
Martinal® OL-107 ZO aluminum hydroxide is vinyl-silane treated, fine precipitated aluminium hydroxide to improve mechanical, rheological and electrical properties in curable polyolefinic and rubber compounds, produced in Bergheim, Germany.
Martinal ® ON-310S
Martinal® ON-310 S aluminum hydroxide is a 10 micron, ground aluminum hydroxide used as a flame retardant and smoke suppressant, produced in Bergheim, Germany.
Martinal ® ON-313S
Martinal® ON-313 S aluminum hydroxide is a 15 micron, ground aluminum hydroxide used as a flame retardant and smoke suppressant, produced in Bergheim, Germany.
Martinal ® ON-320
Martinal® ON-320 aluminum hydroxide is a 20 micron, ground aluminum hydroxide used as a flame retardant and smoke suppressant, produced in Bergheim, Germany.
Martinal ® ON-904
Martinal® ON-904 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.
Martinal ® ON-906
Martinal® ON-906 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.