Product finder
Search narrowed by:
44 product grades found
Pergopak ® M3
Pergopak® M3 matting agent and carrier is used as a matting and effects agent for the coatings industry imparting high matting efficiency, low impact on rheology, improved scratch and abrasion resistance, improvement of adhesion and elasticity, excellent weather resistance and gloss retention. D90 17 microns.
Pergopak ® M4
Pergopak® M4 matting agent and carrier is used as a matting and effects agent for the coatings industry imparting high matting efficiency, low impact on rheology, improved scratch and abrasion resistance, improvement of adhesion and elasticity, excellent weather resistance and gloss retention. D90 14 microns.
Pergopak ® M5
Pergopak® M5 matting agent and carrier is used as a matting and effects agent for the coatings industry imparting high matting efficiency, low impact on rheology, improved scratch and abrasion resistance, improvement of adhesion and elasticity, excellent weather resistance and gloss retention. D90 11 microns.
Pergopak ® M6
Pergopak® M6 matting agent and carrier is used as a matting and effects agent for the coatings industry imparting high matting efficiency, low impact on rheology, improved scratch and abrasion resistance, improvement of adhesion and elasticity, excellent weather resistance and gloss retention. D90 6.5 microns.
Hydral ® 710
Hydral® 710 aluminum hydroxide is a precipitated ultrafine aluminum hydroxide flame retardant with low surface area.
Hydral ® 7
Hydral® Coat 7 aluminum hydroxide is a high performing, untreated precipitated ultrafine white aluminum hydroxide powder with a median particle size of 0.7 microns and uniform particle size distribution. Hydral Coat 7 is a fully de-agglomerated powder.
Hymod ® SB 336 SE
Hymod® SB336 SE aluminum hydroxide has proprietary surfactant treatments and an average particle size of 15.5 microns.
Hymod ® SB432 SP
Hymod® SB432 SP aluminum hydroxide is a vinyl silane treated, 9.1 micron particle size aluminum hydroxide.
Hymod ® SB432 ST1
Hymod® SB432 ST1 aluminum hydroxide is a medium particle size aluminum hydroxide treated with fatty acid.
Martinal ® OL-104 ZO
Martinal® OL-104 ZO aluminum hydroxide is vinyl-silane treated, fine precipitated aluminium hydroxide to improve mechanical, rheological and electrical properties in curable polyolefinic and rubber compounds, produced in Bergheim, Germany.
Martinal ® OL-107 ZO
Martinal® OL-107 ZO aluminum hydroxide is vinyl-silane treated, fine precipitated aluminium hydroxide to improve mechanical, rheological and electrical properties in curable polyolefinic and rubber compounds, produced in Bergheim, Germany.
Martoxid ® MZS
Martoxid® MZS calcined aluminum oxide is an unground, medium calcined aluminum oxide for the production of high brilliance polishing agents for a variety of ferrous and nonferrous metals, and for the fine grinding of plastics and lacquers.
Martoxid ® MZS-12
Martoxid® MZS-12 calcined aluminum oxide is a 10 micron medium calcined aluminum oxide for the production of high brilliance polishing agents for a variety of ferrous and nonferrous metals, and for the fine grinding of plastics and lacquers.
Martoxid ® MZS-3
Martoxid® MZS-3 calcined aluminum oxide is a 3 micron medium calcined aluminum oxide for the production of high brilliance polishing agents for a variety of ferrous and nonferrous metals, and for the fine grinding of plastics and lacquers.
Martoxid ® AN/I
Martoxid® AN/I calcined aluminum oxide is a coarse activated grade for the enrichment and purification of components in solutions. It is specifically used for adsorption, extraction and chromatography, produced in Bergheim, Germany.
Martoxid ® DN-206
Martoxid® DN-206 calcined aluminum oxide is a hard and wear resistant filler used for highly stressed brake systems specifically for the production of brake pads performing in trucks and heavy construction vehicles.
Martoxid ® DN-440
Martoxid® DN-440 calcined aluminum oxide is a 20 micron, hard calcined, fast-acting aluminium oxide used for fine polishing and repolishing of all kinds of steel and for processing nonferrous metals brilliance; pre-grinding of lacquers and plastics.
Martoxid ® DN-6
Martoxid® DN-6 calcined aluminum oxide is a hard and wear resistant filler used for highly stressed brake systems specifically for the production of brake pads performing in trucks and heavy construction vehicles.
Martoxid ® DN/Y
Martoxid® DN/Y calcined aluminum oxide is an aluminium oxide for the production of lapping abrasives for surface treatment of glass and crystal, ball bearings, valve seats, etc, produced in Bergheim, Germany.
Martoxid ® KMS-94
Martoxid® KMS-94 calcined aluminum oxide is a feedstock ready to press for uniaxial and isostatic pressing for the production of oxide ceramic bodies such as grinding media, insulating and wear-resistant parts, etc., produced in Bergheim, Germany.
Martoxid ® KMS-96
Martoxid® KMS-96 calcined aluminum oxide is a feedstock ready to press for uniaxial and isostatic pressing for the production of oxide ceramic bodies such as grinding media, insulating and wear-resistant parts, etc., produced in Bergheim, Germany.
Martoxid ® KMS-98
Martoxid® KMS-98 calcined aluminum oxide is a high purity feedstock ready to press for uniaxial and isostatic pressing for the production of oxide ceramic bodies such as grinding media, insulating and wear-resistant parts, etc., produced in Bergheim, Germany.
Martoxid ® KMS-99
Martoxid® KMS-99 calcined aluminum oxide is a high purity feedstock ready to press for uniaxial and isostatic pressing for the production of oxide ceramic bodies such as grinding media, insulating and wear-resistant parts, etc., produced in Bergheim, Germany.
Martoxid ® MDS
Martoxid® MDS calcined aluminum oxide is an unground aluminum oxide with very high Al2O3-content, especially shaped products subjected to extremely high mechanical, thermal, chemical and electrical loads.
Martoxid ® MDS-6
Martoxid® MDS-6 calcined aluminum oxide is a ground aluminum oxide with high Al2O3-content, particularly suitable for production of wear-resistant components and products subjected to extremely high mechanical, thermal, chemical and electrical loads.
Martoxid ® MN/Y
Martoxid® MN/Y calcined aluminum oxide is designed for the production of lapping abrasives for surface treatment of glass and crystal, ball bearings, valve seats, etc., produced in Bergheim, Germany.
Martoxid ® MPS
Martoxid® MPS calcined aluminum oxide is a fine-grained, very soft aluminum oxide for the production of high brilliance polishing agents for a variety of ferrous and nonferrous metals, and for the fine grinding of plastics and lacquers.
Martoxid ® MR-23
Martoxid® MR-23 calcined aluminum oxide is an Al2O3-component in hard porcelains, refractory binding systems and wear-resistant ceramics, produced in Bergheim, Germany.
Martoxid ® MR-32
Martoxid® MR-32 calcined aluminum oxide is a high compressible superground alumina as a reactive binding component for shaped and unshaped refractory products as well as for technical ceramics, produced in Bergheim, Germany.
Martoxid ® MRS-1
Martoxid® MRS-1 calcined aluminum oxide is a superground aluminum oxide for ceramics with a high Al2O3-content, subjected to extremely high mechanical, thermal, chemical and electrical loads for applications like high efficiency spark plugs and substrates. D50 of 1 micron and D100 of <10 microns.
Martoxid ® MZS-1
Martoxid® MZS-1 calcined aluminum oxide is a ground Al2O3-component in hard porcelains, refractory binding systems and wear-resistant ceramics, produced in Bergheim, Germany.
Martoxid ® PC-12/1
Martoxid® PC-12/1 calcined aluminum oxide is a premium aluminum oxide for the production of polishing pastes and emulsions, especially for fine polishing and repolishing of stainless steel, nonferrous metals, lacquers, plastics and glass.
Martoxid ® PC-12/3
Martoxid® PC-12/3 calcined aluminum oxide is a premium aluminum oxide for the production of polishing pastes and emulsions, especially for fine polishing and repolishing of stainless steel, nonferrous metals, lacquers, plastics and glass. It has a d90 of 13 microns, the narrowest particle size distribution of this series.
Martoxid ® PN-202
Martoxid® PN-202 calcined aluminum oxideis a soft aluminium oxide used in the production of high-brilliance polishing agents for mainly stainless steel and steel and for polishing agents for nonferrous metals and fine grinding of plastics and lacquers.
Martoxid ® PN-6 (12)
Martoxid® PN-6 (12) calcined aluminum oxide is a soft aluminium oxide used in the production of high-brilliance polishing agents for mainly stainless steel and steel and for polishing agents for nonferrous metals and fine grinding of plastics and lacquers.
Martoxid ® PN-6
Martoxid® PN-6 calcined aluminum oxide is a soft aluminium oxide used in the production of high-brilliance polishing agents for mainly stainless steel and steel and for polishing agents for nonferrous metals and fine grinding of plastics and lacquers.
Martoxid ® PS-6 (12)
Martoxid® PS-6 (12) calcined aluminum oxide is a super-soft aluminium oxide used in the production of high-brilliance polishing agents for mainly stainless steel and steel and for polishing agents for nonferrous metals and fine grinding of plastics and lacquers.
Martoxid ® PS-6
Martoxid® PS-6 calcined aluminum oxide is a soft aluminium oxide used in the production of high-brilliance polishing agents for mainly stainless steel and steel and for polishing agents for nonferrous metals and fine grinding of plastics and lacquers.
Onyx Elite ® 339
Onyx Elite® 339 aluminum hydroxide has a soft white color and good air release designed for solid surface. It is an aluminum hydroxide with an average median particle size of 16 microns.
SB 336
SB-336 aluminum hydroxide is a ground high whiteness flame retardant with an average median particle size of 15.5 microns in adhesives, caulks and sealants applications.
Vertex ® 100SA
Vertex® 100 SA is an aminosilane-treated product that provides superior fire performance and enhanced mechanical properties when used to make fire-rated polymeric compounds. The silane treatment promotes coupling of the magnesium hydroxide to the polymer used, providing high dispersion quality and thus enhanced compound performance especially for the high-loading applications. Vertex 100SA can be used in polyolefins and polyamides such as Nylon 6 and Nylon 6,6.
Zerogen ® 100 SP
Zerogen® magnesium hydroxide products provide excellent fire retarding and smoke suppression performance for the thermoplastic and elastomeric compounds. The Zerogen® 100 products are characterized by higher chemical purity compared to Zerogen® 50 products and therefore provide further enhanced performance in compound applications where superior electrical properties are needed, e.g. cable primary insulation materials. Zerogen® 100 SP is an ultrafine particle size; low surface area magnesium hydroxide with vinylsilane treatment designed to provide excellent compounding rheology, high-quality powder dispersion and enhanced compound mechanical properties in such polymers as polyolefins, EPR/EPDM and other elastomers.
Zerogen ® 100 SVT
Zerogen® magnesium hydroxide products provide excellent fire retarding and smoke suppression performance for the thermoplastic and elastomeric compounds. The Zerogen® 100 SVT products are characterized by high chemical purity thus suitable for use in the compound applications where excellent electrical properties are needed, such as in cable insulation materials. Zerogen® 100 SVT is an ultrafine particle size magnesium hydroxide with a proprietary surface treatment that provides superior fire performance when used to make fire-rated EVA compounds. The proprietary surface treatment improves smoke suppression efficiency of magnesium hydroxide and increases limiting oxygen index (LOI) of the EVA compound. As a result, lower magnesium hydroxide loading level can be used leading to enhanced rheological and processing performance, and improved compound mechanical properties. The surface treatment also promotes compatibility of the magnesium hydroxide with the polymer and high quality of dispersion.
Zerogen ® 50 SV
Zerogen® 50 SV is a magnesium hydroxide with a proprietary surface treatment that provides superior fire performance when used to make fire-rated EVA compounds. The proprietary surface treatment improves smoke suppression efficiency of magnesium hydroxide and increases limiting oxygen index (LOI) of the EVA compound. As a result, lower magnesium hydroxide loading level can be used leading to enhanced rheological and processing performance, and improved compound mechanical properties. The surface treatment also promotes compatibility of the magnesium hydroxide with the polymer and high quality of dispersion.