Product finder
Aktive Filter:
73 product grades found
Martinal ® OL-104 LEO
Martinal® OL-104 LEO aluminum hydroxide is a 4 m2/g untreated, fine precipitated aluminium hydroxide with improved compounding performance, higher thermal stability, better powder flowability and higher bulk density after conveying.
Martinal ® OL-107 LEO
Martinal® OL-107 LEO aluminum hydroxide is a 7 m2/g untreated, fine precipitated aluminium hydroxide with improved compounding performance, higher thermal stability, better powder flowability and higher bulk density after conveying and lower compound viscosity.
Martinal ® OL-111 LE
Martinal® OL-111 LE aluminum hydroxide is an untreated, high surface area, fine precipitated aluminium hydroxides with a very low content of soluble electrolytes for demanding requirements (i.e. in the electrical and electronic industries), produced in Bergheim, Germany.
Martinal ® TM-2550
Martinal® TM-2550 aluminum hydroxide is a thermally conductive material designed to be used either by itself or in blends with other fillers to obtain high loadings in epoxy, polyurethane and silicone-based gap-fillers.
Martinal ® TM-2590
Martinal® TM-2590 aluminum hydroxide is a thermally conductive material designed to be used either by itself or in blends with other fillers to obtain high loadings in epoxy, polyurethane and silicone-based gap-fillers.
Martinal ® TM-3620
Martinal® TM-3620 aluminum hydroxide is a thermally conductive material designed to be used either by itself or in blends with other fillers to obtain high loadings in epoxy, polyurethane and silicone-based gap-fillers.
Martinal ® TM-3810
Martinal® TM-3810 aluminum hydroxide is a thermally conductive material designed to be used either by itself or in blends with other fillers to obtain high loadings in epoxy, polyurethane and silicone-based gap-fillers.
MoldX ® A300
MoldX® A300 aluminum hydroxide is optimized to provide dramatically improved processing viscosities to sheet molding compounds (SMC) at loadings ranging from 250 phr to greater than 350 phr. It is Huber's highest performing 'low viscosity' grade.
MoldX ® A400
MoldX® A400 aluminum hydroxide is a third generation optimized aluminum hydroxide product that gives low viscosity at a high loading level (250-380 phr), but requires 20-30% less loading than MoldX® A110 to achieve the same flame retardant performance.
HN 100
HN 100 aluminum hydroxide is a versatile, unground and high whiteness grade with an average median particle size of 75 microns, produced in Europe for applications requiring a course-particle size.
HN 336
HN 336 aluminum hydroxide is a versatile, ground and high whiteness grade with an average median particle size of 14 microns, produced in Europe for coatings-related applications.
HN 36
HN 36 aluminum hydroxide is a versatile, ground and high whiteness grade with an average median particle size of 20 microns, produced in Europe for coatings-related applications.
HN 434
HN 434 aluminum hydroxide is a versatile, ground and high whiteness grade with an average median particle size of 10 microns, produced in Europe for coatings-related applications.
HN 532
HN 532 aluminum hydroxide is a versatile, ground and high whiteness grade with an average median particle size of 6 microns, produced in Europe for coatings-related applications.
Hydral ® 710
Hydral® 710 aluminum hydroxide is a precipitated ultrafine aluminum hydroxide flame retardant with low surface area.
Hydral ® 5
Hydral® Coat 5 aluminum hydroxide is a high performing, untreated precipitated ultrafine white aluminum hydroxide powder with a median particle size of 0.5 microns and uniform particle size distribution. It is a spray-dried product.
Hydral ® 7
Hydral® Coat 7 aluminum hydroxide is a high performing, untreated precipitated ultrafine white aluminum hydroxide powder with a median particle size of 0.7 microns and uniform particle size distribution. Hydral Coat 7 is a fully de-agglomerated powder.
Hydral ® 8
Hydral® Coat 8 aluminum hydroxide is a high performing, untreated precipitated ultrafine white aluminum hydroxide powder with a median particle size of 0.8 microns and uniform particle size distribution. Hydral Coat 8 is a fully de-agglomerated powder.
Hydral ® PGA - SD
Hydral® PGA - SD aluminum hydroxide is a precipitated ultrafine aluminum hydroxide flame retardant with low surface area.
Hymod ® M632 SP
Hymod® M632 SP aluminum hydroxide has proprietary surfactant treatments and an average particle size of 3.5 microns.
Hymod ® M932 SP
Hymod® M932 SP aluminum hydroxide is a high surface area vinyl silane treated aluminum hydroxide grade with a very precise, ultrafine particle size distribution.
Hymod ® M9400 SG
Hymod® M9400 SG aluminum hydroxide is a hydrophobic aluminum hydroxide grade with enhanced surface treatment and lot-to-lot consistency.
Hymod ® M9400 SP
Hymod® M9400 SP aluminum hydroxide is a vinyl silane treated, 1.1 micron particle size aluminum hydroxide flame retardant.
Hymod ® SB 336 SE
Hymod® SB336 SE aluminum hydroxide has proprietary surfactant treatments and an average particle size of 15.5 microns.
Hymod ® SB136 SG
Hymod® SB136 SG aluminum hydroxide is a hydrophobic aluminum hydroxide grade with enhanced surface treatment and lot-to-lot consistency for coatings-related applications.
Hymod ® SB36 SG
Hymod® SB36 SG aluminum hydroxide is a hydrophobic grade with enhanced surface treatment for high loadings in sealants and composites.
Hymod ® SB432 SG
Hymod® SB432 SG aluminum hydroxide is a hydrophobic grade with enhanced surface treatment and lot-to-lot consistency for coatings-related applications.
Hymod ® SB432 SP
Hymod® SB432 SP aluminum hydroxide is a vinyl silane treated, 9.1 micron particle size aluminum hydroxide.
Hymod ® SB432 ST1
Hymod® SB432 ST1 aluminum hydroxide is a medium particle size aluminum hydroxide treated with fatty acid.
Martifin ® OL-005
Martifin® OL-005 aluminum hydroxide is pumpable aqueous suspension (slurry) of highly dispersed aluminium hydroxide for the paper and board industry, manufacturers of dispersion paints; flame retardant filler for aqueous binder systems, produced in Bergheim, Germany.
Martifin ® OL-104 LE
Martifin® OL-104 LE aluminum hydroxide is a white pigment and TiO2-extender for the paper and board industry. It is supplied in white paper bags with water soluble adhesives and soluble markings. Therefore, it can be loaded directly into the pulper with the packaging, produced in Bergheim, Germany.
Martifin ® OL-107
Martifin® OL-107 aluminum hydroxide is a white pigment and TiO2-extender for the paper and board industry. It is supplied in white paper bags with water soluble adhesives and soluble markings, Therefore, it can be loaded directly into the pulper with the packaging, produced in Bergheim, Germany.
Martifin ® ON-313
Martifin® ON-313 aluminum hydroxide is a coarse white pigment for the paper and board industry. It is supplied in white paper bags with water soluble adhesives and soluble markings. Therefore, it can be loaded directly into the pulper with the packaging, produced in Bergheim, Germany.
Martinal ® OL-104 C
Martinal® OL-104 C aluminum hydroxide is a surface treated, fine precipitated aluminum hydroxide, which allows faster mixing and improve the mechanical properties of cross-linked elastomers, produced in Bergheim, Germany.
Martinal ® OL-104 GO
Martinal® OL-104 GO aluminum hydroxide is fine precipitated with a proprietary coating. It is designed for improved elongation at break, rheological and electrical properties especially in thermoplastic or crosslinked EVA/PE or rubber compounds.
Martinal ® OL-104 IO
Martinal® OL-104 IO aluminum hydroxide is amino silane treated, finely precipitated aluminium hydroxide to improve mechanical, rheological and electrical properties e.g. in thermoplastic resins like EVA or EEA, produced in Bergheim, Germany.
Martinal ® OL-104 ZO
Martinal® OL-104 ZO aluminum hydroxide is vinyl-silane treated, fine precipitated aluminium hydroxide to improve mechanical, rheological and electrical properties in curable polyolefinic and rubber compounds, produced in Bergheim, Germany.
Martinal ® OL-107 C
Martinal® OL-107 C aluminum hydroxide is surface treated, fine precipitated alumina trihydrate which imparts special benefits when incorporated into resins and improve the mechanical properties of cross-linked elastomers, produced in Bergheim, Germany.
Martinal ® OL-107 IO
Martinal® OL-107 IO aluminum hydroxide is amino silane treated, finely precipitated aluminium hydroxide to improve mechanical, rheological and electrical properties e.g. in thermoplastic resins like EVA or EEA, produced in Bergheim, Germany.
Martinal ® OL-107 ZO
Martinal® OL-107 ZO aluminum hydroxide is vinyl-silane treated, fine precipitated aluminium hydroxide to improve mechanical, rheological and electrical properties in curable polyolefinic and rubber compounds, produced in Bergheim, Germany.
Martinal ® ON-310S
Martinal® ON-310 S aluminum hydroxide is a 10 micron, ground aluminum hydroxide used as a flame retardant and smoke suppressant, produced in Bergheim, Germany.
Martinal ® ON-313S
Martinal® ON-313 S aluminum hydroxide is a 15 micron, ground aluminum hydroxide used as a flame retardant and smoke suppressant, produced in Bergheim, Germany.
Martinal ® ON-320
Martinal® ON-320 aluminum hydroxide is a 20 micron, ground aluminum hydroxide used as a flame retardant and smoke suppressant, produced in Bergheim, Germany.
Martinal ® ON-904
Martinal® ON-904 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.
Martinal ® ON-906
Martinal® ON-906 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.
Martinal ® ON-908
Martinal® ON-908 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.
Martinal ® ON-921
Martinal® ON-921 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.
Martinal ® ON-935
Martinal® ON-935 aluminum hydroxide is one of a series of aluminium hydroxides designed to offer high loadings with low viscosity behavior as flame retardant filler in synthetic resin, produced in Bergheim, Germany.
Micral ® 1500
Micral® 1500 aluminum hydroxide is an ultrafine Alumina Trihydrate (ATH) with an average median particle size of 1.5 microns.
Micral ® 532
Micral® 532 aluminum hydroxide is a high brightness flame retardant grade with high surface area and has an average median particle size of 5 microns.